top of page
stm-logo-new.png

Productos 

stm-logo-new.png
synchroblock-masspol.jpg

COMPLETE FILLING LINES

STM has been an expert in the production and integration of complete filling lines for 30 years. Comprehensive service of machines individually tailored to the customer’s needs guaranteed the successful launch of over 300 filling lines around the world. The implemented projects are based on many years of experience and knowledge of our specialists. That is why we provide production of PET packaging and filling lines for grocery and chemical products including: water, sodas, dairy products, beers, oils, chemical liquids, acids.

Mas Informacion

stm-logo-new.png
can-series-2.jpg

CAN SERIES MACHINES

CAN series machines feature devices equipped with isobaric filler nozzles, or overflow filler nozzles designed for filling and seaming of PET or aluminium cans. Seamers are suitable to seam a wide range of round containers filled with soft drinks, beer and carbonated soft drinks.
Filler and seamer are mechanically synchronized, with only one drive, which can smoothly drive the filled containers to the seamer without spillage.

  • Product filling: beverages containing CO2, beer, kvass, non- carbonated liquids, HF process, Ice Tea in PET or aluminium cans.

  • Volumes: 250 ml- 500 ml.

  • Packaging: PET, Aluminium cans.

  • Capping: 200, 202.

Mas Informacion

stm-logo-new.png
iso-series-machine-7.jpg
iso-series-machine-min.jpg

ISO SERIES MACHINES

ISO series machines feature devices equipped with isobaric filler nozzles, designed for filling carbonated fluids such as carbonated beverages and water, beer.

  • Product filling: Isobaric

  • Products – CSD, carbonated water, beer

  • Volumes: 0.2 – 2.5 l

  • Packaging: glass, PET

  • Capping: plastic with screw thread, aluminium cap, crown cap

Filler nozzles feature simple design that ensures high level of hygiene and ease of use. Parts in contact with the filled product are made of AISI 316L stainless steel. Machines in their standard version are suitable for CIP. ISO series machines are versatile machines and can also be used with non-carbonated products. Depending on the model, ISO series machines can be prepared for PET containers as well as glass containers; they can be designed as triblocks (RFC) and monoblocks (FC); in case of both versions power is transmitted from a single engine. ISO series machines feature between 12 and 72 filler nozzles.

Mas Informacion

stm-logo-new.png
ncs-11.jpg
nc-series-1.jpg

NC SERIES MACHINES

NC series machines feature devices equipped with “overflow” filler nozzles, for non-carbonated fluids, such as non-carbonated water and beverages, process fluids (including foamy fluids), oils.

  • Product filling: overflow filling

  • Applications: Hot Fill, juices, non-carbonated beverages, process fluids

  • Volumes: 0.2 – 7 l

  • Packaging: glass, PET

  • Capping: plastic with screw thread, aluminium cap, crown cap

Filler nozzles feature simple design that ensures high level of hygiene and ease of use. In case of NC series machines the bottle always remains at the same height, which provides smooth transfer of the bottle. Machines in their standard version are suitable for CIP. NC series machines in their standard version feature intermediate tank with circulation pumps. Depending on the model, NC series machines can be prepared for PET containers as well as glass containers and HDPE containers.
NC series machines feature between 9 and 48 filler nozzles. Parts in contact with the filled product are made of AISI 316L stainless steel.

Mas Informacion

stm-logo-new.png
flowmatic-9.jpg
flowmatic-2.jpg

FLOWMATIC SERIES MACHINES

FlowM series machines feature devices equipped with electronic filler nozzles, fitted with electrostatic flow meters manufactured by E+H, that are designed for filling with non-carbonated, clear liquids, of increased hygienic sensitivity, such as milk, juice.

  • Product filling: electronic

  • Products: non-carbonated, milk, juice

  • Volumes: 0.2 – 2.5 l

  • Capping: plastic with screw thread, aluminium cap, crown cap

Filler nozzles feature simple design that ensures high level of hygiene and ease of use. In case of FlowM machines, the bottle is never in direct contact with the filler nozzle. Parts in contact with the filled product are made of AISI 316L stainless steel. Machines in their standard version are suitable for CIP. FlowM series machines can be equipped with the ULTRACLEAN system, with varying degree of purity. Depending on the model, FlowM series machines can be prepared for PET containers as well as glass containers and HDPE containers. FlowM series machines feature between 9 and 48 filler nozzles.
 

Mas Informacion

stm-logo-new.png
stm-WEIGHTMATIC-4-min.jpg

WEIGHTMATIC SERIES MACHINES

The Weight Matic Series is designed to fill PET bottles, glass and HDPE packagings. The machine series utilises weight filling providing a perfect product weight. The filling is carried out by gravity or supported by pressure rise in a container.

  • Dense products, oils, dairy products with pieces of fruit.

  • Volumes: 0.2l–3.0l

  • Packaging: Glass, PET, HDPE bottles

  • Capping: Plastic with screw thread, aluminum, twist off

Filling valve: Weight filler nozzle can fill various products of different properties, aerated products do not affect the accuracy of net weight filling. It does not affect the temperature, viscosity and foaming as well.

Mas Informacion

stm-logo-new.png
pet-bottles-machine-blow-moulding-molding-min.jpg
pet-bottles-machine-blow-molding-min.jpg

Blow Molding Machines BlueLine Series

New Feature!
Now to our blow molding machines you can add an innovative machine monitoring module. This module provides a live feedback identifying if any of the machine parts does need servicing.

Blueline series machines, manufactured by STM, feature compact devices, with 2, 4, 6 or 8 cavities, depending on the model.
Characteristics of the machines are as follows:

  • high efficiency up to 99%,

  • speed per blow mould – up to 2200bph,

  • compact design,

  • low operating costs, energy consumption: 4,5W per 1L bottle,

  • high repeatability of bottles

  • ease of use, with user-friendly interface and extensive controllability

  • possibility of using low weight preforms

Most of the machine’s functions are controlled by servomotors; this way the machine runs faster, is more quiet and consumes 50% less air at 10 bar than comparable designs based on pneumatics. As a standard, STM machines are equipped with ECO Power Innovation System ® that ensures high quality of produced bottles while providing maximum power savings; moreover, a number of options is also available.

Mas Informacion

stm-logo-new.png
blow-molding-bottle-hot-fill-complete-breweries-for-beer-filling.jpg
advanced-technology-for-min.jpg

Blow Molding Machines BlueLine Big Series

New Feature!
Now to our blow molding machines you can add an innovative machine monitoring module. This module provides a live feedback identifying if any of the machine parts does need servicing.

Blueline BIG series machines, manufactured by STM, feature compact devices, used for manufacture of 7.0 l containers, with 1, 2 or 3 cavities, depending on the model. Characteristics of the machines are as follows:

  • high efficiency up to 99%,

  • speed per blow mould – up to 1300 bph,

  • compact design,

  • low operating costs,

  • high repeatability of bottles,

  • ease of use, with user-friendly interface and extensive controllability,

  • possibility of using low weight preforms.

Most of the machine’s functions are controlled by servomotors; this way the machine runs faster, is more quiet and consumes 50% less air at 10 bar than comparable designs based on pneumatics. As a standard, STM machines are equipped with ECO Power Innovation System ® that ensures high quality of produced bottles while providing maximum power savings; moreover, a number of options is also available.

Mas Informacion

stm-logo-new.png
pet-liquid-bottle-filler-desktop.jpg
bottling-water-liquid-europe-fill-min.jpg

Blow Molding Machines BlueLine HF Series

New Feature!
Now to our blow molding machines you can add an innovative machine monitoring module. This module provides a live feedback identifying if any of the machine parts does need servicing.

Blueline HF series machines, manufactured by STM, feature compact devices, used for manufacture of HOT FILL containers of up to 1.5 l, with 4,6,8 cavities, depending on the model. With the technology used we are capable of manufacturing bottles that can be filled at temperatures up to to 88 °C.
Characteristics of the machines are as follows:

  • high efficiency up to 99%,

  • speed per blow mould – up to 1300 bph (depending on expected temperature of the filled media),

  • compact design,

  • low operating costs,

  • high repeatability of bottles,

  • ease of use, with user-friendly interface and extensive controllability,

  • possibility of using low weight preforms.

Most of the machine’s functions are controlled by servomotors; this way the machine runs faster, is more quiet and consumes 50% less air at 10 bar than comparable designs based on pneumatics. As a standard, STM machines are equipped with ECO Power Innovation System ® that ensures high quality of produced bottles while providing maximum power savings; moreover, a number of options is also available.

Mas Informacion

stm-logo-new.png
brm10-10.jpg

Blow Molding Machines BRM 10 Series

New Feature!
Now to our blow molding machines you can add an innovative machine monitoring module. This module provides a live feedback identifying if any of the machine parts does need servicing.

Rotative blow molding machines are fully automatic equipment for production of PET containers using blanks in the form of preforms. Equipment of a standard blow molding machine:

  • Rotating unit with ten single-cavity molds

  • Heating stove with ten heating sections

  • Bernecker control system with an industrial computer and a 15-inch LCD panel

  • Air preparation system with filter system

  • Preform feeding system with a hopper

  • Sound absorbing safety covers

  • Set of key spare parts

Mas Informacion

stm-logo-new.png
self-adhesive-labeling-min-1.jpg

Labelling

STM supplies labelling equipment. We offer equipment for various applications and performance. The main product is the OPP labelling machines for polypropylene labels fed from a roll. These devices apply labels with hot glue. The capacity, depending on the model, may be as high as 20 000 bph. We supply process line machines for both small production facilities as well as rotary lines with process line with larger capacity.

Mas Informacion

stm-logo-new.png
bottles-cans-palletizing.jpg

Packaging and Palletizing

STM offers machines for bulk packing and complete back ends of process lines.
Our offer includes devices for packaging using the following materials:

  • film

  • film with flat tray or rim

  • WRAP-AROUND packing in cardboard boxes

We also offer palletizing systems based on industrial robots with manipulators of our own production.

Mas Informacion

stm-logo-new.png
stm-logo-new.png
stm-logo-new.png
stm-logo-new.png
bottom of page